With the help of the squeegee aplicator, push firmly at 45º from the centre to the sides (up) to avoid the wrinkles and the air bubbles. Remove the rest of the white paper scrapping down.

Remove carefully the trasparent mask at 180º in relation with the adhesive. Make sure nothing remains on the transparent clingfilm.

Put the motif in the right position and hold it with adhesive tape. Apply it on the centre of the sticker to lean it better.

Remove the upper adhesive tape of the motif and peel off the silicon paper carefully, making sure that the drawing remains with the transparent paper (if not rub until it is well fixed).

Cut the white paper in the centre, so that the upper part of the adhesive may stick. Don't forget that the adhesive is very sticky; you must be careful to keep it away the clothes and wall).

With the help of the squeegee aplicator, push firmly at 45º from the centre to the sides (up) to avoid the wrinkles and air bubbles.

Once placed the superior part, remove the remaining white paper, making sure that the drawing remains with the transparent clingfilm.

With the help of the squegee aplicator,push firmly at 45º from the centre of the adhesive towards the sides (inferior part) to avoid this way the wrinkles and air bubbles.

Remove the transparent clingfilm carefully at 180º in relation to the adhesive. Make sure that no part of the drawing rests with the white silicon paper.

At last, only...Enjoy the pleasure of living with your Teleadhesivo!